2018 Acura P0304: What It Means & Is It Safe to Drive?
P0304 on the 2018 Acura: Cylinder 4 Misfire Detected. Here's what it means, what usually causes it, what repairs typically cost, and whether it's safe to keep driving.
PowertrainHigh urgency
What this code means
Misfire confirmed on cylinder 4. On 4-cylinder engines, this is the last cylinder—check coil and plug first, then injector, then compression.
Common causes on the 2018 Acura
- Worn spark plug on cylinder 4
- Failed ignition coil on cylinder 4
- Faulty or clogged fuel injector
- Low compression or valve issue
Symptoms
- Check Engine Light
- Rough idle and shaking
- Poor acceleration or power loss
Typical fixes
- Replace spark plug and COP coil on cylinder 4
- Clean or replace fuel injector
- Compression and leak-down test if basic parts check out
Repair cost range
For a 2018 Acura, repairs for P0304 typically fall between $150 and $900, depending on the root cause and labor rates in your area.
Known issues on Acura
Acura K-series P0304 on cylinder 4 is typically a worn spark plug. K-series engines are durable but cylinder 4 plugs can run slightly hotter. Replace all four plugs as a set—K-series plug replacement is straightforward. OEM NGK plugs are recommended.
Most commonly affected models
TSX K24A2 2004–2008ILX K24Z7 2013–2022Integra K20C 2023+