2006 Audi P0011: What It Means & Is It Safe to Drive?
P0011 on the 2006 Audi: Camshaft Position A – Timing Over-Advanced or System Performance (Bank 1). Here's what it means, what usually causes it, what repairs typically cost, and whether it's safe to keep driving.
PowertrainMedium urgency
What this code means
The intake camshaft on bank 1 is more advanced than the PCM commanded, or the VVT system isn't responding as expected. Often caused by low/dirty oil or a faulty oil control valve.
Common causes on the 2006 Audi
- Low or dirty engine oil (most common—change oil first)
- Failed or sludged oil control valve (OCV/VVT solenoid)
- Stretched or worn timing chain
- Stuck VVT actuator (cam phaser)
Symptoms
- Check Engine Light
- Rough idle or rattling on cold startup
- Poor fuel economy
- Reduced power
Typical fixes
- Oil change with correct viscosity oil (often resolves it)
- Clean or replace oil control valve
- Replace timing chain if stretched
- Replace cam phaser if faulty
Repair cost range
For a 2006 Audi, repairs for P0011 typically fall between $50 and $1200, depending on the root cause and labor rates in your area.
Known issues on Audi
Audi 2.0T TFSI and 3.0T supercharged engines see P0011 from the same EA888 timing system as VW. Ensure oil is within spec and the N205/N318 camshaft adjustment valves are clean before replacing them.
Most commonly affected models
A4 2009–2017A6 2012–2018Q5 2013–2018