2020 Audi P0304: What It Means & Is It Safe to Drive?
P0304 on the 2020 Audi: Cylinder 4 Misfire Detected. Here's what it means, what usually causes it, what repairs typically cost, and whether it's safe to keep driving.
PowertrainHigh urgency
What this code means
Misfire confirmed on cylinder 4. On 4-cylinder engines, this is the last cylinder—check coil and plug first, then injector, then compression.
Common causes on the 2020 Audi
- Worn spark plug on cylinder 4
- Failed ignition coil on cylinder 4
- Faulty or clogged fuel injector
- Low compression or valve issue
Symptoms
- Check Engine Light
- Rough idle and shaking
- Poor acceleration or power loss
Typical fixes
- Replace spark plug and COP coil on cylinder 4
- Clean or replace fuel injector
- Compression and leak-down test if basic parts check out
Repair cost range
For a 2020 Audi, repairs for P0304 typically fall between $150 and $900, depending on the root cause and labor rates in your area.
Known issues on Audi
Audi EA888 P0304 on cylinder 4 is typically carbon buildup or a coil failure. On the TT 2.0T, high-performance driving accelerates carbon deposit formation on cylinder 4 intake valves. Intake valve cleaning every 50k miles is recommended on direct-injection Audi four-cylinders.
Most commonly affected models
A4 2.0T TFSI 2009–2016A3 2.0T 2006–2013TT 2.0T 2008–2015