What does code P0300 mean on a Buick and is it safe to drive?
P0300: Random/Multiple Cylinder Misfire Detected. Here's what it means on your Buick, what usually causes it, what repairs typically cost, and how safe it is to keep driving.
What this code means
The PCM has detected misfires across multiple cylinders. This can cause damage to the catalytic converter if driven for long.
Common causes for your Buick
- Worn spark plugs or ignition coils
- Clogged or bad fuel injectors
- Low compression
- Vacuum leak, bad MAF, or fuel delivery issue
Symptoms
- Check Engine Light (often flashing under load)
- Rough idle, shaking, loss of power
- Possible smell of unburned fuel
Typical fixes
- Replace spark plugs and coils as needed
- Clean or replace fuel injectors
- Fix vacuum/fuel issues
- Compression test if no obvious cause
Repair cost range
For a Buick, repairs for P0300 often fall between $150 and $1200, depending on the cause and whether you use OEM or aftermarket parts. Labor rates vary by location.
Known issues on Buick
Buick P0300 on 3.6L LFX V6 (Enclave, LaCrosse) can result from a failed ignition coil or a timing chain stretch issue known to affect LLT and LFX engines. The timing chain tensioner failure is a common complaint—look for a rattling noise on cold start alongside P0300.
Most commonly affected models