2019 Chevrolet P0335: What It Means & Is It Safe to Drive?
P0335 on the 2019 Chevrolet: Crankshaft Position Sensor A Circuit Malfunction. Here's what it means, what usually causes it, what repairs typically cost, and whether it's safe to keep driving.
What this code means
The PCM is not receiving the expected signal from the crankshaft position sensor (CKP). This sensor tells the ECM the exact position and speed of the crankshaft. Without it, the engine may not start or will stall and run poorly.
Common causes on the 2019 Chevrolet
- Failed crankshaft position sensor
- Damaged or corroded sensor wiring/connector
- Tone ring (reluctor wheel) damage or debris
- Failed PCM (rare)
Symptoms
- Engine won't start or stalls unexpectedly
- Check Engine Light on
- Engine cranks but will not fire
- Intermittent stalling at speed
Typical fixes
- Replace crankshaft position sensor
- Inspect and repair wiring harness and connector
- Check tone ring for damage or packed debris
Repair cost range
For a 2019 Chevrolet, repairs for P0335 typically fall between $100 and $350, depending on the root cause and labor rates in your area.
Known issues on Chevrolet
GM P0335 on LS V8 and Ecotec 4-cylinder engines is typically a failed CKP sensor or damaged wiring. On LS engines, also inspect the crankshaft reluctor ring for damage if the sensor alone doesn't resolve the fault.
Most commonly affected models