2018 Chrysler P0128: What It Means & Is It Safe to Drive?
P0128 on the 2018 Chrysler: Coolant Thermostat (Coolant Temp Below Thermostat Regulating Temperature). Here's what it means, what usually causes it, what repairs typically cost, and whether it's safe to keep driving.
What this code means
The engine is not reaching normal operating temperature in the expected time. Usually a stuck-open thermostat.
Common causes on the 2018 Chrysler
- Thermostat stuck open
- Coolant temperature sensor fault
- Low coolant level
Symptoms
- Check Engine Light
- Heater may blow cold
- Poor fuel economy
- Temperature gauge stays low
Typical fixes
- Replace thermostat
- Replace coolant temperature sensor if faulty
- Refill coolant and check for leaks
Repair cost range
For a 2018 Chrysler, repairs for P0128 typically fall between $100 and $350, depending on the root cause and labor rates in your area.
Known issues on Chrysler
Chrysler Pentastar 3.6L P0128 is the same repair as Dodge—a stuck-open thermostat. The Pentastar thermostat is accessible and inexpensive; use a Mopar OEM part for the best result.
Most commonly affected models