2019 Chrysler P0128: What It Means & Is It Safe to Drive?

P0128 on the 2019 Chrysler: Coolant Thermostat (Coolant Temp Below Thermostat Regulating Temperature). Here's what it means, what usually causes it, what repairs typically cost, and whether it's safe to keep driving.

PowertrainLow urgency

What this code means

The engine is not reaching normal operating temperature in the expected time. Usually a stuck-open thermostat.

Common causes on the 2019 Chrysler

  • Thermostat stuck open
  • Coolant temperature sensor fault
  • Low coolant level

Symptoms

  • Check Engine Light
  • Heater may blow cold
  • Poor fuel economy
  • Temperature gauge stays low

Typical fixes

  • Replace thermostat
  • Replace coolant temperature sensor if faulty
  • Refill coolant and check for leaks

Repair cost range

For a 2019 Chrysler, repairs for P0128 typically fall between $100 and $350, depending on the root cause and labor rates in your area.

Known issues on Chrysler

Chrysler Pentastar 3.6L P0128 is the same repair as Dodge—a stuck-open thermostat. The Pentastar thermostat is accessible and inexpensive; use a Mopar OEM part for the best result.

Most commonly affected models

300 2011–2018Town & Country 2011–2016200 2011–2014

Is it safe to keep driving your 2019 Chrysler with this code?

For driving-safety guidance—how far you can go, when to tow, and what's urgent—see these checklists:

See all codes for your Chrysler

Looking for a different code, or want the full guide without the year filter?