What does code P0300 mean on a Chrysler and is it safe to drive?
P0300: Random/Multiple Cylinder Misfire Detected. Here's what it means on your Chrysler, what usually causes it, what repairs typically cost, and how safe it is to keep driving.
PowertrainHigh urgency
What this code means
The PCM has detected misfires across multiple cylinders. This can cause damage to the catalytic converter if driven for long.
Common causes for your Chrysler
- Worn spark plugs or ignition coils
- Clogged or bad fuel injectors
- Low compression
- Vacuum leak, bad MAF, or fuel delivery issue
Symptoms
- Check Engine Light (often flashing under load)
- Rough idle, shaking, loss of power
- Possible smell of unburned fuel
Typical fixes
- Replace spark plugs and coils as needed
- Clean or replace fuel injectors
- Fix vacuum/fuel issues
- Compression test if no obvious cause
Repair cost range
For a Chrysler, repairs for P0300 often fall between $150 and $1200, depending on the cause and whether you use OEM or aftermarket parts. Labor rates vary by location.
Known issues on Chrysler
Chrysler P0300 on Pentastar 3.6L V6 (Town & Country, 200) can be caused by failed ignition coils or worn spark plugs. On 300 with the 5.7L HEMI and MDS, the same lifter/cam wear issues that affect Dodge and Ram apply here.
Most commonly affected models
300 2005–2014Town & Country 2008–2016200 2011–2014