2016 Ford P0303: What It Means & Is It Safe to Drive?
P0303 on the 2016 Ford: Cylinder 3 Misfire Detected. Here's what it means, what usually causes it, what repairs typically cost, and whether it's safe to keep driving.
PowertrainHigh urgency
What this code means
The PCM has detected a misfire specifically on cylinder 3. Diagnosis follows the same steps as P0301—swap parts to the same position on a known-good cylinder to isolate the fault.
Common causes on the 2016 Ford
- Worn or fouled spark plug on cylinder 3
- Failing ignition coil on cylinder 3
- Leaking or clogged fuel injector
- Low compression on cylinder 3
Symptoms
- Check Engine Light, often flashing under load
- Rough idle or shaking
- Loss of power, hesitation
Typical fixes
- Replace spark plug and coil on cylinder 3
- Test and replace fuel injector
- Compression test if ignition parts don't resolve it
Repair cost range
For a 2016 Ford, repairs for P0303 typically fall between $150 and $900, depending on the root cause and labor rates in your area.
Known issues on Ford
Ford 5.4L P0303 often involves a blown-out spark plug on cylinder 3. Inspect the spark plug threads in the head before assuming a coil failure. On 4.6L V8 Explorers, cylinder 3 is on the driver-side bank and COP failure is the most common cause.
Most commonly affected models
F-150 5.4L 3V 2004–2010Explorer 4.6L 2002–2005Mustang GT 4.6L 2005–2009