Home/Ford/P0306

What does code P0306 mean on a Ford and is it safe to drive?

P0306: Cylinder 6 Misfire Detected. Here's what it means on your Ford, what usually causes it, what repairs typically cost, and how safe it is to keep driving.

PowertrainHigh urgency

What this code means

Misfire on cylinder 6, found on V6 and V8 engines. On transversely-mounted V6 engines the rear bank cylinders (including cylinder 6) often have higher labor costs due to access difficulty.

Common causes for your Ford

  • Worn spark plug on cylinder 6
  • Failed coil-on-plug
  • Fuel injector fault
  • Low compression

Symptoms

  • Check Engine Light, may flash under load
  • Rough idle or vibration
  • Hesitation and power loss

Typical fixes

  • Replace spark plug and COP coil on cylinder 6
  • Replace or clean injector on cylinder 6
  • Compression and leak-down test if no improvement

Repair cost range

For a Ford, repairs for P0306 often fall between $150 and $1200, depending on the cause and whether you use OEM or aftermarket parts. Labor rates vary by location.

Known issues on Ford

Ford 5.4L V8 P0306 follows the same diagnosis as other cylinders—check for blown spark plug threads first. On 4.6L V8 Explorer and Mustang, OEM coils are significantly more reliable than cheap aftermarket units.

Most commonly affected models

F-150 5.4L 3V 2004–2010Mustang GT 4.6L 2005–2009Explorer 4.6L 2002–2005

Is it safe to keep driving your Ford with this code?

For driving-safety guidance—how far you can go, when to tow, and what's urgent—see these checklists:

Browse P0306 on your Ford by model year

Year-specific guides include Ford-tailored causes and repair costs.

More codes for Ford

View all OBD2 code guides for Ford