2015 Jeep P0700: What It Means & Is It Safe to Drive?
P0700 on the 2015 Jeep: Transmission Control System Malfunction. Here's what it means, what usually causes it, what repairs typically cost, and whether it's safe to keep driving.
PowertrainHigh urgency
What this code means
Generic code indicating the TCM has detected a problem. Specific transmission codes (P07xx) will usually be present.
Common causes on the 2015 Jeep
- Various transmission electrical or hydraulic faults
- Low or dirty fluid
- Solenoid or sensor failure
Symptoms
- Check Engine Light
- Transmission slipping, harsh shifts
- Limp mode possible
Typical fixes
- Read transmission-specific codes
- Service or replace transmission fluid
- Replace solenoids/sensors as diagnosed
Repair cost range
For a 2015 Jeep, repairs for P0700 typically fall between $100 and $3000, depending on the root cause and labor rates in your area.
Known issues on Jeep
Jeep Grand Cherokee with the ZF 8HP70/8HP45 often produces P0700 from a solenoid or mechatronic fault. ZF transmissions require ATF+4 or ZF LifeguardFluid 8—incorrect fluid causes failures and transmission codes.
Most commonly affected models
Grand Cherokee 2011–2019Wrangler 2012–2018Cherokee 2014–2018