2007 Mazda P0302: What It Means & Is It Safe to Drive?
P0302 on the 2007 Mazda: Cylinder 2 Misfire Detected. Here's what it means, what usually causes it, what repairs typically cost, and whether it's safe to keep driving.
PowertrainHigh urgency
What this code means
The PCM has detected a misfire on cylinder 2. Same logic as P0301, but for a different cylinder.
Common causes on the 2007 Mazda
- Worn or fouled spark plug on cylinder 2
- Failing ignition coil
- Leaking or clogged fuel injector
- Low compression on cylinder 2
Symptoms
- Check Engine Light
- Noticeable shaking, especially at idle
- Loss of power or hesitation
Typical fixes
- Replace spark plug/coil on cylinder 2
- Clean or replace injector
- Address internal engine problems if compression is low
Repair cost range
For a 2007 Mazda, repairs for P0302 typically fall between $150 and $900, depending on the root cause and labor rates in your area.
Known issues on Mazda
SKYACTIV-G P0302 develops from injector fouling or a failed direct injection injector. Given the high compression, a slightly weaker injector spray on cylinder 2 causes a detectable misfire that worsens under light load. An injector flow test confirms the fault.
Most commonly affected models
Mazda3 SKYACTIV-G 2012–2018CX-5 2.5L 2013–2018Mazda6 2.5L 2014–2018