What does code P0304 mean on a Mitsubishi and is it safe to drive?
P0304: Cylinder 4 Misfire Detected. Here's what it means on your Mitsubishi, what usually causes it, what repairs typically cost, and how safe it is to keep driving.
PowertrainHigh urgency
What this code means
Misfire confirmed on cylinder 4. On 4-cylinder engines, this is the last cylinder—check coil and plug first, then injector, then compression.
Common causes for your Mitsubishi
- Worn spark plug on cylinder 4
- Failed ignition coil on cylinder 4
- Faulty or clogged fuel injector
- Low compression or valve issue
Symptoms
- Check Engine Light
- Rough idle and shaking
- Poor acceleration or power loss
Typical fixes
- Replace spark plug and COP coil on cylinder 4
- Clean or replace fuel injector
- Compression and leak-down test if basic parts check out
Repair cost range
For a Mitsubishi, repairs for P0304 often fall between $150 and $900, depending on the cause and whether you use OEM or aftermarket parts. Labor rates vary by location.
Known issues on Mitsubishi
Mitsubishi 4G69 and 4G63 P0304 on cylinder 4 is typically a coil or plug failure. On the 4G63 turbo in older Lancer Evolution models, P0304 can indicate a fuel injector issue under boost—check injector balance data before replacing the coil.
Most commonly affected models
Outlander 2.4L 4G69 2004–2012Lancer 2.0L 4G63 2002–2007Galant 2.4L 2004–2009