What does code P0302 mean on a Ram and is it safe to drive?
P0302: Cylinder 2 Misfire Detected. Here's what it means on your Ram, what usually causes it, what repairs typically cost, and how safe it is to keep driving.
PowertrainHigh urgency
What this code means
The PCM has detected a misfire on cylinder 2. Same logic as P0301, but for a different cylinder.
Common causes for your Ram
- Worn or fouled spark plug on cylinder 2
- Failing ignition coil
- Leaking or clogged fuel injector
- Low compression on cylinder 2
Symptoms
- Check Engine Light
- Noticeable shaking, especially at idle
- Loss of power or hesitation
Typical fixes
- Replace spark plug/coil on cylinder 2
- Clean or replace injector
- Address internal engine problems if compression is low
Repair cost range
For a Ram, repairs for P0302 often fall between $150 and $900, depending on the cause and whether you use OEM or aftermarket parts. Labor rates vary by location.
Known issues on Ram
Ram HEMI P0302 on cylinder 2 is a non-MDS cylinder, so lifter issues are less likely. A failed coil-on-plug or spark plug is the most common cause. On the 3.6L Pentastar, inspect the rear-bank cam follower condition if a ticking sound accompanies the misfire.
Most commonly affected models
Ram 1500 5.7L HEMI 2009–2021Ram 1500 3.6L Pentastar 2012–2021