2015 Toyota P0410: What It Means & Is It Safe to Drive?
P0410 on the 2015 Toyota: Secondary Air Injection System Malfunction. Here's what it means, what usually causes it, what repairs typically cost, and whether it's safe to keep driving.
PowertrainMedium urgency
What this code means
The secondary air injection system, which pumps fresh air into the exhaust on cold starts, is not working correctly.
Common causes on the 2015 Toyota
- Failed air pump
- Stuck or leaking one-way check valve
- Clogged or rusted air injection pipes
Symptoms
- Check Engine Light
- May fail emissions or show high cold-start emissions
Typical fixes
- Replace secondary air pump
- Replace check valve
- Clean or replace corroded piping
Repair cost range
For a 2015 Toyota, repairs for P0410 typically fall between $250 and $900, depending on the root cause and labor rates in your area.
Known issues on Toyota
Toyota P0410 on the 4.7L V8 is almost always a failed secondary air injection pump or a clogged air pump inlet hose. The inlet hose cracks over time and allows water intrusion that burns out the pump. Replace the pump and inspect the hose simultaneously.
Most commonly affected models
4Runner 4.7L 2003–2009Tundra 4.7L 2000–2006Land Cruiser 4.7L 2000–2007