2006 Volvo P0016: What It Means & Is It Safe to Drive?
P0016 on the 2006 Volvo: Crankshaft/Camshaft Position Correlation – Bank 1, Sensor A. Here's what it means, what usually causes it, what repairs typically cost, and whether it's safe to keep driving.
What this code means
The PCM has detected that the crankshaft and intake camshaft positions on bank 1 are out of expected sync. A serious code that can indicate timing chain wear or jump.
Common causes on the 2006 Volvo
- Stretched or jumped timing chain
- Faulty crankshaft or camshaft position sensor
- Worn timing chain tensioner or guides
- Incorrect cam phaser position
Symptoms
- Check Engine Light
- Hard starting or no-start
- Rough running, stalling
- Rattling from timing chain area on startup
Typical fixes
- Replace timing chain, tensioner, and guides
- Replace crankshaft or camshaft position sensor
- Inspect and replace cam phaser if locked
Repair cost range
For a 2006 Volvo, repairs for P0016 typically fall between $300 and $2500, depending on the root cause and labor rates in your area.
Known issues on Volvo
Volvo B5254 inline-5 and B6324S inline-6 engines develop P0016 from CVVT solenoid screen clogging due to extended oil drain intervals. An engine flush followed by fresh 5W-30 full synthetic oil often clears the code; replace the solenoid only if it persists after clean oil.
Most commonly affected models