Home/Volvo/P0306

What does code P0306 mean on a Volvo and is it safe to drive?

P0306: Cylinder 6 Misfire Detected. Here's what it means on your Volvo, what usually causes it, what repairs typically cost, and how safe it is to keep driving.

PowertrainHigh urgency

What this code means

Misfire on cylinder 6, found on V6 and V8 engines. On transversely-mounted V6 engines the rear bank cylinders (including cylinder 6) often have higher labor costs due to access difficulty.

Common causes for your Volvo

  • Worn spark plug on cylinder 6
  • Failed coil-on-plug
  • Fuel injector fault
  • Low compression

Symptoms

  • Check Engine Light, may flash under load
  • Rough idle or vibration
  • Hesitation and power loss

Typical fixes

  • Replace spark plug and COP coil on cylinder 6
  • Replace or clean injector on cylinder 6
  • Compression and leak-down test if no improvement

Repair cost range

For a Volvo, repairs for P0306 often fall between $150 and $1200, depending on the cause and whether you use OEM or aftermarket parts. Labor rates vary by location.

Known issues on Volvo

Volvo B6294T inline-six P0306 on cylinder 6 (last cylinder) is typically a failed COP. On high-mileage B6294T engines, P0306 alongside oil consumption may indicate valve stem seal wear allowing oil to foul the cylinder 6 plug—inspect the plug condition carefully.

Most commonly affected models

XC90 T6 B6294T 2003–2014S80 T6 3.2L 2007–2012

Is it safe to keep driving your Volvo with this code?

For driving-safety guidance—how far you can go, when to tow, and what's urgent—see these checklists:

Browse P0306 on your Volvo by model year

Year-specific guides include Volvo-tailored causes and repair costs.

More codes for Volvo

View all OBD2 code guides for Volvo