2013 Subaru P0341: What It Means & Is It Safe to Drive?
P0341 on the 2013 Subaru: Camshaft Position Sensor Range/Performance. Here's what it means, what usually causes it, what repairs typically cost, and whether it's safe to keep driving.
PowertrainHigh urgency
What this code means
The camshaft position sensor signal is out of expected range or timing. Similar to P0340 but focused on performance rather than a hard fault.
Common causes on the 2013 Subaru
- Weak camshaft position sensor
- Timing chain or belt stretched or jumped a tooth
- Wiring/connector problems
Symptoms
- Check Engine Light
- Hard starting, rough running, or stalling
- Reduced power or poor fuel economy
Typical fixes
- Replace camshaft position sensor
- Inspect and correct timing chain/belt issues
- Repair wiring/connectors
Repair cost range
For a 2013 Subaru, repairs for P0341 typically fall between $150 and $1200, depending on the root cause and labor rates in your area.
Known issues on Subaru
Subaru P0341 on EJ engines usually means a failed cam position sensor or debris on the cam sensor reluctor. On WRX EJ20, oil contamination at the cam sensor from a leaking cam seal is common—inspect for oil at the sensor connector before replacing.
Most commonly affected models
Forester 2.5L EJ25 2006–2010Outback 2.5L EJ25 2005–2009Impreza WRX EJ20 2002–2005